Pitney-bowes DI425 FastPac Inserting Systems Manual do Utilizador descarregar pdf (Página 53)

OMR • 3

3-15SV61656 Rev.A

Setting Select/Supplementary Feeders

Press Change (+/-) until you see

the option you want:

If sheet feeder 1 is the main/

scanning feeder, you can pro-

gram sheet feeder 2 and/or the

insert feeder for normal (one per

envelope) feeding or select feeding.

If sheet feeder 2 is the main/scanning feeder, you can program sheet

feeder 1 and/or the insert feeder for normal (one per envelope) feed-

ing or select feeding.

Select feed allows the machine to feed one piece selectively from

either feeder per envelope.

On Double Detect

Feeder on with the double detector operating, without select

feed. (The double detector stops the machine if two or more

sheets feed simultaneously from the feeder.)

On SF Double Detect

Select feeder on with the double detector operating. (The

double detector stops the machine if two or more sheets

feed simultaneously from the feeder.)

On SF

Select feeder on without the double detector.

Off

Feeder turned off for this job.

Feeder on without the double detector or select feed.

When the feeder is set as required, press Next (►) to go to the

sealer setting. Job programming then follows the normal sequence

described from page 2-16 of this guide.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 99 100

Sem comentários

Pitney-bowes DI425 FastPac Inserting Systems Manual do Utilizador Página 53